SEEC INT. AUDIO SYSTEMS, HIGH-END PRODUCER
SEEC INT. AUDIO SYSTEMS
PRODUCER OF HIGH-END AUDIO EQUIPMENT
Click on the image for more information
You reach us by E-mail with:
Seec Int. Audio Systems
For The Netherlands (Nederland):
SEEC INT. AUDIO SYSTEMS
5731 JT MIERLO
TEL: +31 (0)492-663462
Mobile: +31 (0)622544611
For the USA:
BERTRAND AUDIO IMPORTS
49 FAIRVIEW AVE
NASHUA, NH 03060
TEL: +1 603 883-1982
FAX: +1 603 880 4533
You can reach B.A.I. in the USA by E-mail with: Click Button
For GERMANY Contact:
RICHARD-WAGNER STRAßE 1
D 35516 MUNZENBERG/GAMBACH
TEL: +49 (0)6033-67966
FAX: +49 (0)0633-64063
You can reach AUDIOSTONES by E-mail with: Click Button
For the CZECK REPUBLIC contact:
vzorkovna: U poty 1463/3
180 00 Praha 8
TEL: +42 0777270017
You can reach SVENSOUND by E-mail with: Click Button
For SPAIN contact:
TEL: +34 (0) 91 4024994
You can reach AUDIO ARTE in Spain by E-mail with: Click Button
For TURKEY contact:
Aydogan Kardesler Ltd.sti.
Eskiuskudar icerenkoy yolu. Aydogan Apt.
No:12/2 Icerenkoy 81120 ISTANBUL
TEL: + 90 216 5743877
You can reach EXTREME AUDIO in Turkey by E-mail with: Click Button
For FRANCE contact:
20, Avenue des Tignes
TEL: + 33 4 9706 5420
You can reach BOOSTER CORP. in France by E-mail with: Click Button
For DENMARK contact:
DK 6700 ESBJERG
TEL: + 45 7545 0102
You can reach ACTIV HiFi. in Denmark by E-mail with: Click Button
Thank you for showing interest in our products.
Audio equipment manufactured by SEEC is complying with the highest standard in high end audio equipment.
SEEC INT. AUDIO SYSTEMS started in 1988 with the development of advanced electronics specially designed for the reproduction of music for professional and semi professional users. The original concept now became reality and embodies pure listening pleasure.
"SEEC INT. AUDIO SYSTEMS" HAS, INVENTED, AS THE FIRST COMPANY IN THE WORLD, A NEW LOW OHMIC INTEGRATED STANDARD ?
Through time, a standard is used, say: The 47k Ohm input impedance and a low output impedance. This gave an increasing audio quality because noise levels were reduced to acceptable proportions. The changeover to standard 47k Ohm was practically spoken a good approach, but by no means a perfect solution. The most important advance is that all equipment no matter what brand can be connected to each other, and thus compatible. The cable reflection and phaseshifting inherent to this standard never found a fundamental solution. Besides the superior quality of our audio products, SEEC INT. AUDIO SYSTEMS has added a fully new uncompromised interlink-system to our program called the ASC-2 (Active Signal Cable/Interlink).
* This new Low Ohmic interconnection method designed by SEEC for professional applications, will now solve all these problems. It is both an interlink with BNC to RCA connectors of the same impedance. Higher driven energy levels are then an absolute requirement. In that combination this improvement will come to its full performance. The function and explanation of this system can be compared with the data exchange between computers in networks. If that system would not be that 50 Ohm, but the current audio standard, then it is nearly impossible to send data. A large impedance difference between "in" and "outputs" imp. will always result in phase-shifting and reflections no matter how expensive the cable. SEEC AUDIO SYSTEMS was determind to design a system for the better audio equipment "without" compromises. SEEC Low Ohmic interconnections can be seen as one of the best solutions to eliminate any form of dis behavour in the audio signals. The dynamic behaviour and accuracy is herewith strongly improved and signal losses are reduced to a minimum.
Go Back to
the Top..Or ?
We are looking for serious: Contact us today
Copyright © 1997, SEEC INT. Software Castle by
Kees van Haaren